home *** CD-ROM | disk | FTP | other *** search
/ New Star Software Collection / NSS_Collection.iso / 3-070 recognita plus 20 / 1.ima / README.DOC < prev    next >
Text File  |  1993-06-15  |  5KB  |  138 lines

  1.  
  2.         Welcome to Recognita Plus for DOS and Windows, version 2.00.C63
  3.  
  4. 15/June/1993
  5.  
  6.  
  7.  
  8. Re: Using Recognita Plus 2.0 (RP) on a Local Area Network
  9.  
  10.     This Single User version of Recognita Plus allows you to run the
  11.     program from a single workstation at a time. Anyway it is also
  12.     possible to use Recognita Plus from multiple workstations. If you
  13.     want to do so, please consult your local dealer for getting a
  14.     Multi User Licence and technical description.
  15.  
  16.  
  17.  
  18. Re: Manual "Scanners supported by Recognita Plus" (Rev. P2.0/ES/01.93)
  19.     pages 14-15:
  20.  
  21.     All scanner models of Fujitsu M3093, M3094, M3095, M3096
  22.     with Kofax and Xionics cards:
  23.  
  24.          MS Windows 3.0/3.1 386 Enhanced Mode is supported.
  25.          These cards are supported only under MS Windows 3.0/3.1,
  26.          they are not supported under MS-DOS.
  27.  
  28.          If you get "Communication timeout" error message using
  29.          Xionics Lightning/Plus card in other cases than the scanner
  30.          is turned off it is recommended to install 1 or 2 MB memory
  31.          on the interface card.
  32.  
  33.  
  34. New scanners supported:
  35.  
  36.         AVision AV100:
  37.                             Sheet-feed, 300 dpi resolution,
  38.                             built in ADF supported,
  39.                             brightness between 1-255, default is 128,
  40.                             CONFIG.SYS entry: DEVICE=<path>AVDRV.SYS
  41.                             PS/2 not supported.
  42.  
  43.         Epson GT-6500:
  44.                             Flat-bed, colour, 300 dpi resolution,
  45.                             ADF not supported,
  46.                             brightness between 1-7, default is 5,
  47.                             interface card: Epson PC-Para Board,
  48.                             PS/2 supported.
  49.                             Instead of Contrast, you can set the colour
  50.                             of scanning: red, green, blue, gray (from
  51.                             left to right).
  52.  
  53.         Epson GT-6500 (SCSI):
  54.                             Flat-bed, colour, 300 dpi resolution,
  55.                             ADF not supported,
  56.                             brightness between 1-7, default is 5,
  57.                             interface card: Epson SCSI,
  58.                             PS/2 not supported.
  59.                             Instead of Contrast, you can set the colour
  60.                             of scanning: red, green, blue, gray (from
  61.                             left to right).
  62.  
  63.         Umax UC840:
  64.                             Flat-bed, colour, 300, 400 dpi resolution,
  65.                             ADF and UTA-840 transparency adaptor supported,
  66.                             brightness between 1-101, default is 51,
  67.                             interface card: GSII,
  68.                             PS/2 supported (with interface card GSII-PS/2)
  69.                             Although this is a colour scanner, Recognita
  70.                             Plus uses it only in black/white.
  71.  
  72.                             Note: if you use UTA-840 transparency adaptor,
  73.                             answer "yes" for the question about the ADF in
  74.                             the Setup program.
  75.  
  76.  
  77.  
  78. Re: Recognizing Faxed Documents
  79.  
  80.     Reading fax files:
  81.  
  82.     Enabling Recognita's FAX button slightly modifies the recognition
  83.     algorithm optimizing it for reading low resolution ("Standard" mode)
  84.     faxes. This option is not necessary for faxes transmitted in "Fine"
  85.     mode. Running Recognita with the FAX button switched on may even
  86.     decrease recognition accuracy when reading non-fax or "Fine" mode fax
  87.     documents. So be careful. If you are not sure what mode the fax file
  88.     is transmitted in you could try both settings.
  89.  
  90.         Recognita Plus supports the following fax image file formats:
  91.             TIFF G3, G4
  92.             PCX
  93.             Microtek
  94.             Faxline (LightFax)
  95.             Brooktrout
  96.  
  97.  
  98.     Reading fax printouts:
  99.  
  100.     If you want to read a fax printout scanning it again use 300 dpi
  101.     resolution and turn the FAX button ON even for "Fine" mode faxes!
  102.  
  103.  
  104. Re: Running Recognita Plus for DOS in a DR-DOS environment
  105.  
  106.     Super PC-Kwik Version 4.04 used by DR-DOS is not compatible with the
  107.     PharLap DOS Extender. If you have any problems running RECOGN under DR-DOS
  108.     disable PC-Kwik. You may write a batch file which disables PC-Kwik, runs
  109.     RECOGN then re-enables PC-Kwik. For example:
  110.  
  111.         SUPERPCK /U
  112.         RECOGN
  113.         SUPERPCK /A+
  114.  
  115.  
  116.  
  117.  
  118.  
  119. For further information you may also contact us:
  120.  
  121.         Recognita Corp. of America
  122.         1156 Aster Avenue
  123.         Sunnyvale, CA 94086, USA
  124.         Phone: 1-408-241-5772
  125.         Toll-free: 800 255-4 OCR
  126.         Fax: 1-408-241-6009
  127.  
  128. or
  129.  
  130.         SZKI Recognita Corp.
  131.         Customer Support Dept.
  132.         Budapest, Marvany u. 17.
  133.         H-1012, Hungary, Europe
  134.         Letters: H-1251 Budapest, P.O.Box 55
  135.         Phone: (361) 201-84-52
  136.         Fax: (361) 201-76-07
  137.  
  138.